DOIONLINE 
DOIONLINE Publish In |
International Journal of Mechanical and Production Engineering (IJMPE)-IJMPE |
 Journal Home Volume Issue |
||||||||
Issue |
Volume-5,Issue-9 ( Sep, 2017 ) | |||||||||
Paper Title |
Optimization of Dimensional Accuracy of Wax Models Manufactured by Rapid Tooling Method | |||||||||
Author Name |
Zamaniashani J., Nasari H. | |||||||||
Affilition |
Mechanical Engineering Department, K. N. Toosi University of Technology, Tehran, Iran | |||||||||
Pages |
19-21 | |||||||||
Abstract |
The primary objective of this research is to determine the accuracy of a Typical Gas Turbine Blade wax patterns which includes common areas in Turbine Blades, such as Airfoil, Platform and Root, produced by soft tooling RTV (room temperature vulcanization mold) methods, silicone rubber molds and epoxy molds as well as comparing them. It is essential to use the optimal injection parameters during molding in order to obtain good dimensional accuracy of wax patterns. From the current study it is noticed that the epoxy mold produces more accurate patterns than the silicone rubber mold. Furthermore, the range of dimensional changes in various directions of the wax patterns, were obtained. Average Shrinkage in direction along the length and width of the root in silicone rubber mold are almost 0.6%, 3.5% respectively. And perpendicular to Platform in direction of Airfoil is 0.6% approximately. Also average shrinkage in epoxy mold in direction along the length and width of the root are almost 1.1%, 0.6% respectively and perpendicular to Platform in direction of Airfoil is almost 0.6% too. These studies will help those who apply both rapid tooling and investment casting in turbine blades production to estimate the changes required in the initial CAD drawings to produce a final optimized casting model with minimal dimensional inaccuracy. Keywords- Turbine Blades; Rapid Tooling; Investment Casting; Wax Models | |||||||||
| View Paper | ||||||||||
