DOIONLINE

DOIONLINE NO - IJMPE-IRAJ-DOIONLINE-15514

Publish In
International Journal of Mechanical and Production Engineering (IJMPE)-IJMPE
Journal Home
Volume Issue
Issue
Volume-7,Issue-5  ( May, 2019 )
Paper Title
Tool Wear of Poly Crystalline Diamond in Cutting WC-Co Cemented Carbide with High-Pressure Coolant Supplied
Author Name
Tadahiro Wada
Affilition
Department of Mechanical Engineering, Nara National College of Technology, Japan
Pages
23-26
Abstract
In order to identify an effective PCD tool for the high-speed cutting of WC-16 mass% Co cemented carbide, the influences of diamond content and diamond particle size on the tool wear were experimentally investigated. As the WC-16 mass% Co cemented carbide was turned with high-pressure coolant supplied, the tool wear was experimentally investigated. The following results were obtained: (1) In turning WC-16 mass% Co cemented carbide with the PCD tool, the wear progress slowed down considerably by using the high-pressure coolant supplied method. (2) In the case of the cutting of high-pressure coolant supplied by the PCD tool, the tool wear of the PCD tool decreased with the increase in the diamond particle size. (3) In the case of the cutting of the high-pressure coolant supplied by the PCD tool, which has a large diamond particle size, WC-16 mass% Co cemented carbide could be cut at the higher cutting speed of 1.167 m/s. Keywords - Cutting, Polycrystalline diamond (PCD), WC-Co cemented carbide, High-pressure coolant supplied, Tool wear.
  View Paper