DOIONLINE

DOIONLINE NO - IJAMCE-IRAJ-DOIONLNE-12303

Publish In
International Journal of Advances in Mechanical and Civil Engineering (IJAMCE)-IJAMCE
Journal Home
Volume Issue
Issue
Volume-5,Issue-2  ( Apr, 2018 )
Paper Title
Innovative Bonding Agent of Steel Bars in Concrete Made from High Calcium Fly Ash Geopolymer Mortar Containing Hybrid Cement
Author Name
Darakorn Intarabut, Hattakorn Sodrum, Tanapoom Ongloy, Tanakorn Phoo-Ngernkham
Affilition
Department of Civil Engineering, Faculty of Engineering and Architecture, Rajamangala University of Technology Isan, NakhonRatchasima, Thailand
Pages
71-74
Abstract
This article presented the influence of hybrid cement (HPC) replacement, sand-to-binder ratio, sodium silicate-to-sodium hydroxide solutions (Na2SiO3-to-NaOH ratio) and liquid alkaline-to-binder ratio on compressive strength of high calcium fly ash (FA) geopolymer mortar. The FA was replaced with HPC at the ratios of 100:0, 90:10, 80:20and 70:30.The sand-to-binder ratioof 0.5, 1.0, 1.5,Na2SiO3-to-NaOH ratios of 1.0, 2.0, 2.5,and liquid alkaline-to-binder ratios of 0.45, 0.55, 0.60, 0.65,were also tested.Constants14M NaOH concentration was used in all mixes.Test results indicated that the compressive strength tended to increase with increase of HPC replacement. The compressive strength of geopolymer mortars at sand-to-binder ratiosof 0.5, 1.0, liquid alkaline-to-binder ratios of 0.45, 0.55 and Na2SiO3-to-NaOH ratio of 2.5, were the best results. Therefore, all of FA geopolymer mortar containing HPC with different sand-to-binder ratio, liquid alkaline-to-binder ratio, Na2SiO3-to-NaOH ratio meet the requirement of chemical anchorage except Na2SiO3-to-NaOH ratio of 1.0. Keywords - Geopolymer, high calcium fly ash, hybrid cement,bonding agent,steel bars in concrete.
  View Paper